Automatic pipeline welding machine is mainly used in petrochemical industry, heating pipe network, tap water and gas pipeline, etc.
The all-position automatic welding device is composed of welding head, walking track, automatic control system, wire feeding mechanism, wireless remote control and other parts. YX-G168 type all-position automatic welding head has the advantages of high intelligence, light weight, strong mobility, wide application range, high work efficiency and high welding qualification rate. System and other redundant patented technologies can be used for flat welding, vertical welding, horizontal welding, overhead welding, and all-position 5G/6G welding fill welding and cover welding, suitable for GMAW/FCAW-GS and other welding processes. Its working principle is: the pipeline is fixed, the welding robot is adsorbed on the track to automatically crawl and weld, and the wireless remote control is used to operate, and the configuration of different tracks is also suitable for all-position welding requirements of other workpieces. Pipeline all-position automatic welding is when the pipeline is relatively fixed, the welding head drives the welding torch to move around the pipe wall along the track to weld the pipe fittings.
The automatic welding process is equipped with an automatic control system, with stable process performance and little external influence. Since the welding operation is done automatically by machinery, the training cost of the welder is greatly reduced. In the welding of large-diameter thick-walled pipes, its speed, quality and ergonomics cannot be compared with other methods.
Pipeline automatic welding equipment has the following advantages in the welding process:
1. The welding seam is well formed and the welding efficiency is high;
2. Wide range of welding materials, easy to realize all-position welding and automation of the welding process;
3. During the welding process, the heating and melting of the arc and the molten pool are clearly visible, which is convenient for finding problems and adjusting in time during the welding process;
4. The requirements for the welder's operating level are low, and the operation can be started after training.
Post time: Sep-01-2022